Specification
GIGABYTE Z170X-GAMING3 Motherboard
Features:
Supports 6th Generation Intel® Core Processor
Dual Channel DDR4, 4 DIMMs
Intel® USB 3.1 with USB Type-C - The World’s Next Universal Connector
3-Way Graphics Support with Exclusive Ultra Durable Metal Shielding over the PCIe Slots
Dual PCIe Gen3 x4 M.2 Connectors with up to 32Gb/s Data Transfer (PCIe NVMe & SATA SSD support)
3 SATA Express Connectors for up to 16Gb/s Data Transfer
115dB SNR HD Audio with Built-in Rear Audio Amplifier
Killer E2200 Gaming Networks
High Quality Audio Capacitors and Audio Noise Guard with LED Trace Path Lighting
APP Center Including EasyTune and Cloud Station Utilities
GIGABYTE UEFI DualBIOS Technology
Specification:
Form Factor: ATX Form Factor; 30.5cm x 23.5cm
CPU: Support for Intel® Core i7/i5/i3 processors /Intel® Pentium® processors /Intel® Celeron® processors
Chipset: Intel Z170 Express Chipset
LAN: Killer E2201 LAN chip (10/100/1000 Mbit)
Memory:
4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
Dual channel memory architecture
Support for DDR4 3466(O.C.) /3400/3333/3300/3200/3000/2800/2666/2400/2133 MHz memory modules
Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Profile (XMP) memory modules
Onboard Graphics:
Integrated Graphics Processor-Intel® HD Graphics support:
1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz
1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz
Support for up to 3 displays at the same time
Maximum shared memory of 512 MB
Audio:
Realtek® ALC1150 codec
TI Burr Brown® OPA2134 operational amplifier
Support for Sound Blaster X-Fi MB3
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out
Expansion Slots:
1 x PCI Express x16 slot, running at x16 (PCIEX16)
1 x PCI Express x16 slot, running at x8 (PCIEX8)
1 x PCI Express x16 slot, running at x4 (PCIEX4)
3 x PCI Express x1 slots
Storage Interface:
2 x M.2 Socket 3 connectors (Socket 3, M key, type 2242/2260/2280 SATA & PCIe x4/x2/x1 SSD support)
3 x SATA Express connectors
6 x SATA 6Gb/s connectors
Support for RAID 0, RAID 1, RAID 5, and RAID 10
USB:
7 x USB 3.0/2.0 ports (3 ports on the back panel, 4 ports available through the internal USB headers)
6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
Chipset+Intel® USB 3.1 Controller:
1 x USB Type-C™ port on the back panel, with USB 3.1 support
1 x USB 3.1 Type-A port (red) on the back panel
Internal I/O Connectors:
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
2 x M.2 Socket 3 connectors
3 x SATA Express connectors
6 x SATA 6Gb/s connectors
1 x CPU fan header
1 x water cooling fan header
3 x system fan headers
1 x front panel header
1 x front audio panel header
1 x S/PDIF Out header
2 x USB3.0/2.0 headers
2 x USB2.0/1.1 headers
1 x TPM header
1 x Thunderbolt add-in card connector
1 x serial port header
1 x Clear CMOS jumper
1 x audio gain control switch
Back Panel Connectors:
1 x PS/2 keyboard/mouse port
1 x D-Sub port
1 x DVI-D port
1 x HDMI port
1 x USB Type-C port, with USB 3.1 support
1 x USB 3.1 Type-A port (red)
3 x USB 3.0/2.0 ports
2 x USB 2.0/1.1 ports
1 x RJ-45 port
1 x optical S/PDIF Out connector
I/O Controller: iTE I/O Controller Chip
H/W Monitoring:
System voltage detection
CPU/System/Chipset temperature detection
CPU/CPU OPT/System fan speed detection
CPU/System/Chipset overheating warning
CPU/CPU OPT/System fan fail warning
CPU/CPU OPT/System fan speed control
BIOS:
2 x 64 Mbit flash
Use of licensed AMI UEFI BIOS
Support for DualBIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Operating System:
Support for Windows 10/8.1 64-bit
Support for Windows 7 32-bit/64-bit
Box Contents:
GA-Z170X-Gaming 3 motherboard
Four SATA cables
Motherboard driver disk
I/O Shield
User's Manual
One 2-Way SLI bridge connector
Quick Installation Guide
One G Connector